The handmade 100% carbon monocoque construction of the Bont Vaypor T track cycling shoe is made for pure performance.
With its unidirectional carbon construction (with exception of final cosmetic layer), 3.6 mm stack height, industryleading strength to weight ratio and Bont's proprietary resin allowing customisation of fit, the Vaypor T willensure that your power is transferred straight to the drive train without waste. The Vaypor T is available in 4Shiny Microfiber colours.
Cleat Micro Grid
The cleat micro grid has been included to provide riders with the ability to fine tune their cleat placement.
Buckle & Lace Closure
Closure is achieved via Bont's non-slip lace and buckle combination.
TPU Toe Protector
The toe protector not only protects the front area of the shoe from wheel rub and impact, but also houses ventilationholes for improving airflow through the shoe.
Anti Stretch
Between the outer leather and the liner we add a material that is proprietary to Bont to stop the cycling shoe fromstretching over time. This material has similar strength characteristics to Kevlar. The material is stitched to theouter leather and bonded to the liner so it can never move or be removed, it becomes part of the cycling shoesstructure. This layer assits in pedalling efficiency by maintaining a supportive structure over the top of the footin the upward part of the pedal stroke.
Last Design
A last is a replica of a foot that the cycling shoe is built around. Last makers do not make cycling shoe lasts, theyonly make shoe lasts so perfecting a cycling shoe last requires a great deal of expertise in functional biomechanicsand ongoing research. At Bont, we have been perfecting our performance footwear lasts since 1975 and the process isongoing. We believe we place more importance and thus place more effort into our last than any other cycling shoebrand and it is the reason that Bont cycling shoes continue to be a leader in providing the most functional andcorrect anatomical support to cyclists than any other brand on the market. Our motto in terms of cycling shoe fit issimple, "We make shoes for cycling, not walking."
Carbon Fiber
Bont carbon fiber is sourced exclusively from the world's #1 carbon manufacturer, Toray of Japan. The base of theVaypor T is made by hand utilizing uni-directional carbon fiber which is embedded with epoxy thermo setting resin.The fibers are hand laid in the matrix according to the strain they will have to bear. The Vaypor T utilizesunidirectional carbon fiber allowing Bont to create a performance cycling shoe with very specific strengthcharacteristics based on stress points in cycling. As unidirectional carbon absorbs less resin then cross weavefibers, it also assists in the weight reduction of the cycling shoes.
Padding
The Vaypor T utilises closed cell memory foam that will not retain water assisting in maintaining a lighter shoeduring wet conditions as well as ensuring sweat which can begin to break down the durability of the shoe is notabsorbed.
Medial Longitudinal Arch Support
Structural medial longitudinal arch support is provided in all models to stop over pronation of feet.
Over pronation is one of the main contributors to incorrect tracking of knees during a cyclists pedaling phase due tointernal rotation of tibia and femur. This can result in knee injuries.
In addition, the rotation of tibia/femur can cause the pelvis to tilt resulting in lower back strain.
Anatomical Forefoot Shape
Conventional cycling shoes offer a “dress shoe” type shaping. Although highly aesthetic this will cause the toesalong with the metatarsals to be overly constricted, compressing the nerves between the metatarsals which oftenresults in the common "hot foot" sensation.
Bont cycling shoes anatomical shaping allows the foot to function in its most efficient and anatomically correctposition. The foot is supported in its endeavour to relax through the metatarsal joints allowing the pedalling forceto be spread across the greatest possible surface area.
Anatomical Heel Cup
The anatomical heel cup shaping of Bont cycling shoes provides increased stability during the pull through stage ofpedaling stroke and up stroke. This stabilization is achieved without any mechanical operation or over tightening ofstraps/laces allowing for increased comfort and blood circulation.
Lateral Forefoot Support
Bont’s lateral forefoot support ensures neutral positioning of the forefoot and alleviates common issues associatedwith over pronation and supination. These issues often result in incorrect tracking of knees causing injuries alongwith hip and lower back pain.
Features
- Material: 100% Carbon Chassis with Shiny Microfiber.
- Stack Height: 3.6 mm.
- Air Vents: 40 air vents on frontal area of shoe and air gills in arch area.
- Innersole: EVA thermo-moldable.
- Sole Guards: Replaceable.
- Padding: Memory Foam.
- Cleat Mounting: MM grid plus grip / 3 Hole Look Configuration.
- Fit Customization: Fully Heat Moldable Chassis utilizing Epoxy Thermoset Resin Closing Options Lace + BuckleReplaceable
- Weight: 225 grams.
- Fit Options: Standard & Wide Fit.
